Loading...

A lathe center, often shortened to center, is a tool that has been ground to a point to accurately position a workpiece on an axis. A center is also used to support longer workpieces where the cutting forces would deflect the work excessively, reducing the finish and accuracy of the workpiece, or creating a hazardous situation.

Loading...

Description

•  A dead centre (one that does not turn freely, i.e., dead) used to support the workpiece at either the fixed or rotating end of the machine. When used in the fixed position, dead centres produces friction between the workpiece and centre, due to the rotation of the workpiece.
•  Dead centers are great for setting up work and for use in situations where a live center will not fit. Even though the tip is carbide and will not gall like HSS, carbide must be lubricated during turning operations or it will burn.
•  Made of carbon steel, Hardened & Ground to DIN Standard  806 / ISO 298.
•  Also called full dead centers.
•  The carbide / HSS tips are brazed into the socket with a close tolerance for maximum strength.

 

Plain
Item Code No.
Carbide Tipped
Item Code No.
HSS Tipped
Item Code No.
MTBody Dia.
mm
Total Length
Inch
Total Length
mm
ABM-IMT-4230ABM-IMT-4237ABM-IMT-424409.22-3/4”70
ABM-IMT-4231ABM-IMT-4238ABM-IMT-4245112.23-3/16”80
ABM-IMT-4232ABM-IMT-4239ABM-IMT-42462184”100
ABM-IMT-4233ABM-IMT-4240ABM-IMT-4247324.15”125
ABM-IMT-4234ABM-IMT-4241ABM-IMT-4248431.66-3/8”160
ABM-IMT-4235ABM-IMT-4242ABM-IMT-4249544.78”200
ABM-IMT-4236ABM-IMT-4243ABM-IMT-4250663.810-5/8”270

Categories

MADE TO ORDER

CUSTOM DESIGN TOOLS
CUSTOMER’S BRANDING
DESIRED PACKING
GLOBAL SPEEDY DELIVERY

RELATED PRODUCTS

Taper Turning Attachment - with Dead Center for Lathe Machine
Taper Turning Attachment – with Dead Center for...
Much easier for doing a taper turning job rather than going...
Taper Turning Attachment
Taper Turning Attachment
Much easier for doing a taper turning job rather than going...
dead center lathe center half
Half Dead Center – Lathe Centre
Another good use of a dead center in the tailstock is...
bull nose live centers
Bull Nose Live Centers
The bullnose fits tailstocks with Morse taper  spindles and two preloaded...
Translate »